Product ID:TTE-490 26270 HAZE GRAY
MSDS Date:06/18/1991
FSC:8010
NIIN:00-917-2256
MSDS Number: BNCGP

PPG INDUSTRIES, INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555/(800)245-2590/441-9695

Cage: DO894

PPG INDUSTRIES, INC.

9 ALLISON PARK, PA 15101 US

Telephone: 412-592-5555

Cage: DO894

CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

SILICA, AMORPHOUS--DIATOMACEOUS EARTH

CAS: 68855-54-9

Fraction By Weight: 1-2%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

TITANIUM DIOXIDE 2101

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

PETROLEUM, HYDROTREATED LIGHT PETROLEUM DISTILLATE

CAS: 64742-47-8

Fraction By Weight: 2-5%

MEDIUM ALIPHATIC SOLVENT NAPHTHA

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 15-20%

MINERAL SPIRITS

CAS: 64741-92-0

Fraction By Weight: 15-20%

ACGIH TLV: NOT ESATABLISHED

FILM FORMERS, RESIN AND ADDITIVES

Fraction By Weight: 25-30%

QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <1%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 1-2%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

MORE INFORMATION CONCERNING INGREDIENTS ON FILE WITH

RTECS: 9999999ZZ

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:INGEST: HARMFUL OR FATAL. EYE: SEVERE
IRRITATION. SKIN: MODERATE IRRITATION. INHALATION: HARMFUL, EYE,
NOSE, RESPIRATORY TRACT, THROAT IRRITATION, PERMANENT BRAIN DAMAGE,
NERVOUS SYSTEM DAMAGE. INHALI NG CONCENTRATED VAPOR MAY BE HARMFUL
ORFATAL. CHRONIC: SILICOSIS (DISABLING LUNG DISEASE).
Explanation of Carcinogenicity:CRYSTALLINE SILICA & QUARTZ HAVE BEEN
ASSOCIATED BY THE IARC WITH AN INCREASED RISK OF CANCER IN
LABRATORY ANIMALS.
Effects of Overexposure:HIGH SOLVENT LEVELS: EYE WATERING, HEADACHES,
NAUSEA, DIZZINESS, LOSS OF CORDINATIONS. EXCESSIVE EYE CONTACT:
REDNESS, ITCHING, BURNING SENSATION AND VISUAL DISTURBANCES.
EXCESSIVE SKIN CONTACT: DRYNE SS, ITCHING, CRACKING, BURNING,
REDNESS, SWELLING.

First Aid:INGESTION: DO NOT INDUCE VOMITING. EYE: FLUSH IMMED W/WATER
15 MIN. SKIN: FLUSH IMMEDIATELY W/WATER FOLLOWED BY WASHING W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION & OTHER SUPPORTIVE MEASURES AS REQUIRED. OTHER: IF
INGESTION, ANY TYPE OF OVEREXPOSURE OR SYMPTOMS OCCUR DURING OR
FOLLOWING USE OF PROD, CONTACT POISON CONTROL CTR, EMERG RM OR DR.
HAVE MSDS AVAILABLE.

Flash Point Method:PMCC
Flash Point:107F,42C
Lower Limits:0.8
Extinguishing Media:NFPA CLASS B EXTINGSHRS--CLASS II COMBUST LIQ FIRE
(CARBON DIOXIDE, DRY CHEMICAL,UNIVERSAL AQUEOUS FILM FORMING FOAM).
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, MAY BE USED
(FOG NOZZLE PREFERRED) TO COOL CLSD CNTNR TO PREVENT PRESS BLDUP &
AUTOIGNIT/EXPLOS WHEN EXPOSED TO HEAT. WEAR SCBA.
Unusual Fire/Explosion Hazard:KEEP CNTNRS CLOSED. ISOLATE FROM
HEAT/IGNIT SOURCE. CLOSED CNTNRS MAY EXPLODE W/HEAT. DON'T APPLY TO
HOT SRFCS, TOXIC GAS MAY FORM ON CONTACT W/HOT SRFCS/FLAME.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/RESPIRATORY, SKIN, EYE PROTECTION PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL W/SAWDUST,
VERMICULITE AND OTHER AB SORBENT & PLACE INTO CONTAINERS FOR
DISPOSAL.

Handling and Storage Precautions:DO NOT STROE ABOVE 120 F. STORE LARGE
QUANTITIES IN BLDGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATERIAL IS PART MULTIPLE COMPONENT COATING
SYSTEM, READ MAT'L SAFETY DATA SHEET FOR OTHER COMPONENT(S) BEFORE
BLENDING AS RESULTING MIXTURE MAY HAVE HAZARDS OF ALL PARTS. GRND
CNTNRS WHEN POURING. AVOID FREE FALL GREATER THAN FEW INCHES

Respiratory Protection:VENT AREA TO PREVENT OVEREXPOS. NIOSH/MSHA
(TC-23C) RSPRTR/(TC-19C) AIR SUPPLIED RSPRTR MAY BE USED. READ
RSPRTR MFR'S INSTRUCTIONS & LITERATURE TO DETERMINE TYPE OF
AIRBORNE CONTAMINANTS AGAINST WHIC H RSPRTR IS EFFECTIVE & HOW
FITTED.
Ventilation:PROVIDE GEN DILUT/LOCAL EXHAUST (VOL/PATTRN) TO KEEP CONC
BELOW TLV/PEL/LEL/REMOVE DECOMP PROD DURING WELDING/FLAME-CUT.
Protective Gloves:NEOPRENE, NITRILE, BUTYL OR LATEX GLOVES
Eye Protection:CHEM SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health

Boiling Pt:B.P. Text:138 TO 242C
Vapor Pres:2.2
Vapor Density:> AIR
Spec Gravity:1.23
Viscosity:N/K *BY WT
Evaporation Rate & Reference:16 (BU AC=100)
Solubility in Water:0.0%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGREDIENT
Percent Volatiles by Volume:52.60

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:WELDING BRAZING OR FLAME CUTTING ON
SURFACES COATED W/MAT'L MAY PRODUCE FUMES INCLUDING: CO, OXIDES OF
NITROGEN.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.